Using your DAB/FM Digital Radio
Let's get started
Power source
Mains power
1. Connecting the unit to any other power source may damage the
unit. Unwind the mains adapter cable to its full length. Connect the
end of the cable to the DC IN
unit and then connect the mains adapter to the mains socket. Make
sure the mains adapter is firmly inserted into the mains socket. The
unit is now ready to use.
2. To switch the unit off completely, unplug the mains adapter from
the mains socket.
DC (battery) operation
1. Ensure the AC/DC adaptor is disconnected from the radio and AC
mains.
2. Installed the batteries (4×1.5V R14/C batteries) into the battery
compartment by following the polarity (+ or -) indications.
3. Press the STANDBY button to turn the radio on.
Remarks: To obtain the best performance in DC operation, the use of
alkaline batteries is highly recommended.
• Using your radio at high volume will reduce your battery
life. When the batteries lose power, the sound becomes
weak/distorted and display backlight becomes unstable.
• When the batteries become weak, the display will show
"Battery Low". The batteries should be replaced.
• When the batteries are completely exhausted, the power
is turned off.
18
Socket at the rear of the