Power Source; Basic Operation - Bush NE-2600 Instruction Manual

Using your Kitchen DAB/FM Radio
Let's get started

POWER SOURCE

Mains Power
1. Connecting the unit to any other power source may cause damage the unit. Unwind the mains
adapter cable to its full length. Connect the end of the cable to the DC IN
at the rear of the unit and then connect the mains adapter to the mains socket. Make sure the
mains adapter is firmly inserted into the mains socket. The unit is now ready to use.
2. To switch the unit off completely, unplug the mains adapter from the mains socket.

BASIC OPERATION

Powering ON/OFF
After connecting the mains adapter to the unit and the mains socket, the unit will enter Standby
mode.
1. Press the STANDBY button to switch on the unit.
2. Press the STANDBY button again to switch the unit back to Standby mode.
3. Disconnect the power cable of the mains adapter from the mains socket if you want to switch
the unit off completely.
Selecting Modes
Press MODE button repeatedly to switch between modes (DAB or FM).
Adjusting the Volume
Turn the VOLUME dial to adjust the volume.
Automatically Setting the Clock
The clock will be updated automatically if you can receive DAB/FM signal in your location.
In order to synchronize to the current local time, you must leave the unit to receive signals from
the DAB/FM station for a period of time.
14
Socket