Pre Out Jacks Connections; Connecting To The Game Jacks / Front Aux Jacks - Kenwood VRS-7200 Instruction Manual

Setting up the system

PRE OUT jacks connections

The receiver has additional PRE OUT jacks.
Note that the output from the PRE OUT jacks needs to be connected
to an external power amplifier.
If you want to connect surround back speakers to these jacks, be always
sure to connect two surround back speakers for the left and right.
R L
SUB
WOOFER SURROUND BACK
PRE OUT
Example:
¶ When you want to connect two surround back
speakers.
¶ When the subwoofer is connected to the
SURR BACK/SW terminals.
Example:
¶ When the surround back speaker is connected to
the SURR BACK/SW terminals.
¶ Connecting a speaker cord directly to a PRE OUT jack will not
produce any sound from the speaker.
14
EN
Surround Back speakers
R
L
Power amplifier
Subwoofer
Power amplifier
Powered subwoofer

Connecting to the GAME jacks / FRONT AUX jacks

If you use a component that you do not usually connect to the receiver,
such as a portable video camera, connect it to the GAME or FRONT AUX
jacks on the front panel of the receiver. These jacks are particularly
convenient when dubbing audio/video from a portable video camera.
FRONT AUX
VIDEO
OUT
AUDIO
OUT
Camcorder
¶ The DIGITAL IN (OPTICAL) jack in the GAME jack section can be
used for connection of digital audio input. This is convenient for
playing a video game through the receiver. ¡
INPUT SELECTOR
GAME
OPTICAL
DIGITAL
AUDIO
OUT
OUT
(AUDIO)
VIDEO
OUT
Game Player