Switching Monitor's Picture; Switching Av Output Picture; Turning Monitor's Picture Off; Displaying Screen Control Screen - Kenwood VZ907 Instruction Manual

MODE
V.SEL
MODE
V.SEL

Switching Monitor's Picture

The monitor's picture switches as shown below each time the V.SEL
button is pressed.
3 Television or Video 1 or Video 2 3 Navigation 3 Video 2
CAUTION
You cannot view video pictures while the vehicle is moving. To enjoy
video pictures, find a safe place to park and engage the parking
brake.

Switching AV Output Picture

The AV output picture switches as shown below each time the V.SEL
button is pressed for over 1 second. (The current setting is displayed
when the picture is switched.)
NORMAL :Picture selected from the TV control menu(page 26)
TV :Picture from the television
VIDEO 1 :Picture input to the AV-IN1 terminal
VIDEO 2 :Picture input to the AV-IN2 terminal
NOTE
When the A907 is connected, the sound of the AV output also switches.

Turning Monitor's Picture Off

Press the SCRN button for over 2 seconds to turn the monitor's
picture off.
NOTE
The picture reappears when a button on the monitor panel is pressed,
when the monitor is lowered then lifted again, and when the engine key
is removed then reinserted.
SCRN
FNC
SCRN
FNC
BRIGHT
BRIGHT
MONITOR SLIDE
MONITOR SLIDE
COLOR
COLOR
SCREEN CONTROL
SCREEN CONTROL

Displaying Screen Control Screen

Pressing the SCRN button will cause the screen control screen (screen
adjustment mode) to be displayed on the video screen.
Adjusting Picture Quality:
[BRIGHT] [ 5 ](+) : The screen gets brighter.
[ ∞ ](-–): The screen gets darker.
[COLOR] [ 5 ](+) : The screen color gets paler.
[ ∞ ](-–): The screen color gets deeper.
[TINT] [ 5 ](red) : Red is intensified. [ ∞ ](green): Green is intensified.
[DIMMER] This can be adjusted to any one of three levels.
[ 5 ](+): The screen gets brighter. [ ∞ ](-–): The screen gets darker.
Adjusting Slide Position:
[MONITOR SLIDE] This can be adjusted to twe positions.
[ ∞ ]: The monitor to front. [ 5 ]: The monitor to back.
Cancelling Screen Control Screen:
Touch the [ OK ] .
NOTE
• With PAL type products, the TINT adjustment does not operate.
• The colour and tint cannot be adjusted for the navigation screen
or the graphic screens (source control, etc.).
• The dimmer cannot be adjusted when the vehicle's lights are off
or when the illumination cable is not connected.
• Separate picture quality settings can be stored for the television,
video 1,video 2 and navigation screens and for day and night.
TINT
TINT
DIMMER
DIMMER
OK
7