Cd Control Function; Cd Operations With The Buttons; Inserting Cds; Track Search - Kenwood VZ907 Instruction Manual

CD Control Function

CD operations with the buttons

MODE
ASPECT
OPEN
PWR OFF
DISC–
FNC

Inserting CDs

Holding the CD with the labeled side facing up, insert it in the CD slot.
The CD will start playing.
CAUTION
• When inserting a CD, be careful that the CD does not touch the
bottom of the monitor or the mechanism. If it does, it may be
scratched.
• Do not attempt to insert a CD into the slot if another one is
already there.
• The unit can only play 12-cm (5-inch) CDs. If you insert an 8-cm
(3-inch) CD, it will get stuck inside and can cause the unit to
malfunction.

Track Search

Making a Forward Track Search:
Press the ¢ button to display the desired track number.
Press once to fast forward to the next track, twice to fast forward to the
track after that, and so forth.
Play starts at the beginning of the displayed track number.
Making a Reverse Track Search:
Press the 4 button to display the desired track number.
Press once to search back to the beginning of the current track, twice to
search back to the beginning of the previous track, and so forth.
Play starts at the beginning of the displayed track number.
24
SCRN
V.SEL FNC
V.OFF
AV OUTPUT V–CD MPX
SELECT
TV/ VD
AM DISC FM SOURCE
4
0
DISC+

Fast Forwarding and Reversing Disc Play

Fast Forwarding Disc Play:
Hold down on the ¢ button.
Release your finger to play the disc at that point.
Reversing Disc Play:
Hold down on the 4 button.
Release your finger to play the disc at the point.
¢
NOTE
When you use the fast-forward/fast-rewind on a video CD, be sure to
stop the fast-forward/fast-rewind before you start the video and audio
playback.

Eject

Press the 0 button located near the CD slot.
The CD stops playing and ejects from the CD slot.
NOTE
When you load a CD and eject it right away, the next time you try to
insert the CD may not load. In such a situation, take the CD out for a
moment and then reinsert it.

Switching Multiple Audio Mode

The audio output mode switches in the following order when the
included FNC button is for over 2 second pressed while playing
CDs:
3 L + R 3 L + L 3 R + R
NOTE
When you change the disc, the setting will return to the default value
"L+R."