Troubleshooting - Whirlpool LWFR7100S Manual

TROUBLESHOOTING

Before making a service call, try the following suggested solutions.
Problem
Nothing works
Top burners do not work
The external burner makes
pop like sounds
The spark plug does not
actuate
Excessive heat around
the cooking utensil on the
cooktop surface
55
In some European factories the letter "W" of the part code mentioned herein will be automatically
17-Sep-2019 13:32:01 EDT | RELEASED
Check
- If the contact has been
properly wired and polarized
to the power supply.
- A fuse has been burned
in the house or the circuit
breaker tripped.
- If there is gas supply in
your home, check if other
appliances that use gas
work.
-If the stove is well
connected to the gas supply.
-If there is gas in your home,
check if other appliances that
use gas work
-If the burner holes are
blocked
- The burner is not wet, nor
its lid.
- That the stove is connected
to the electric current.
-It is sparkling and does not
turn on
-Cooking hours and selected
temperature.
-Type of gas is used in your
home (LP Gas).
- That the stove is connected
to the electric supply.
-The activation of the knob.
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")
Solution
Connect to a grounded
outlet.
Replace the fuse or
reconnect the circuit
Call your gas supplier.
See operating instructions or
contact a specialist.
Call your gas supplier.
Remove the burners and see
the burner operating
instructions.
Connect to the electrical
power duly grounded.
Call an authorized service
technician
Consult the recipe book and
use the Preheat function.
If you do not use LP gas, you
must perform the conversion.
Contact an authorized
service technician.
Connect to a grounded
outlet.
See the Oven operation
section.