Audio Clips - Axis C1410 User Manual

AXIS C1410 Network Mini Speaker
The device interface
Stream
Encoding: Select the encoding to use for the input source streaming. You can only choose encoding if audio input is turned on. If
audio input is tuned off, click Enable audio input to turn it on.
Echo cancellation: Turn on to remove echoes during two-way communication.

Audio clips

Add clip: Click to add a new audio clip.
Click to play the audio clip.
Click to stop playing the audio clip.
The context menu contains:
• Rename: Change the name of the audio clip.
• Create link: Create a URL which, when used, plays the audio clip on the device. Specify the volume and number
of times to play the clip.
• Download: Download the audio clip to your computer.
• Delete: Delete the audio clip from the device.
Listen and record
Click to listen.
Click to start a continuous recording of the live audio stream. Click again to stop the recording. If a recording is ongoing, it
will resume automatically after a reboot.
Note
You can only listen and record if input is turned on for the device. Go to Audio > Device settings to make sure that
input is turned on.
Click to show the storage that is configured for the device. To configure the storage you need to be logged in as an
administrator.
Audio site security
CA certificate: Select the certificate to use when you add devices to the audio site when TLS authentication is enabled in
AXIS Audio Manager Edge.
Save: Click to activate and save your selection.
15