4k/hdr hdmi to hdbaset 1x4 extended distance distribution amplifier (8 pages)
Summary of Contents for Panduit ATLONA AT-RON-444
Page 1
Installation Guide AT-RON-444 4K HDR Four-Output HDMI Distribution Amplifier AT-RON-444 The Atlona Rondo™ 444 (AT-RON-444) is a 1×4 HDMI distribution amplifier for high dynamic range (HDR) formats. Part of the comprehensive family of Atlona 4K HDR integration products, it is HDCP 2.2 compliant and supports 4K/UHD video @ 60 Hz with 4:4:4 chroma sampling, as well as HDMI data rates up to 18 Gbps.
Installation Guide AT-RON-444 Panel Descriptions POWER SYNC LEARN RONDO EDID AT-RON-444 HDMI IN HDMI OUT DC 5V POWER EDID button This LED indicator will glow solid blue Press this button to switch between INT when the unit is powered. and LEARN modes. SYNC HDMI IN This LED indicator will glow solid blue...
Installation Guide AT-RON-444 Power Connector Locate the included orange Phoenix terminal block, and wire the included power supply to the block as shown below. Do not use high-torque devices, when securing the wires, as this may damage the screws and/or connector block. White 5V DC power supply...
Installation Guide AT-RON-444 Mounting Instructions Dual-Unit Rack Installation Two AT-RON-444 units can be connected to one another and installed in a 19” rack, using the included mounting plates. Alternatively, a single AT-RON-444 can be mounted in the rack using the included rack ears. Turn the unit upside-down on a flat surface.
Installation Guide AT-RON-444 Single-Unit Rack Installation Remove the two screws on either side of each unit, as shown below. Position the small rack ear to one side of the AT-RON-444 and secure with the two screws. Position the longer rack ear to the opposite side of the AT-RON-444 and secure with the two screws.
Installation Guide AT-RON-444 LED Indicators Description POWER The AT-RON-444 is powered. The AT-RON-444 is not powered. • Check that the power supply is connected to the AT- RON-444 and that the electrical outlet is live. SYNC The HDMI IN port is connected to an active source. The AT-RON-444 is not detecting an active source.
Page 7
Installation Guide AT-RON-444 EDID The AT-RON-444 provides two EDID modes: INT (internal) and LEARN. NOTE: 4K, 3D, and multichannel audio may not be available when using INT (internal) EDID mode. Internal (INT) Mode When this mode is selected, the internal EDID stored in the AT-RON-442 is presented to the HDMI source.
Installation Guide AT-RON-444 Troubleshooting Problem Solution How do I perform a If updated firmware is available, both firmware and update firmware update on the AT- instructions can be found under the Firmware tab of each of the RON-444? following links. Note that if new firmware is not available, then the Firmware tab will not be displayed.
Installation Guide AT-RON-444 Warranty To view the product warranty, use the following link or QR code: https://atlona.com/warranty/. English Declaration of Conformity The English version can be found under the resources tab at: https://atlona.com/product/at-ron-444/. Chinese Declaration of Conformity 中国RoHS合格声明 由SKU列出於: https://atlona.com/about-us/china-rohs/. Toll free US International atlona.com...