Equipment Required For Assembly; Specification - KDS Agile A-3 Instruction Manual

4.Equipment Required for Assembly

RADIO TRANSMITTER AND ELECTRONIC EQUIPMENT REQUIRED FOR ASSEMBLY
•Brushless electric motor: 2520-1880KV
(3mm Bolt holes, 16-19mm mount width, 3.5mm motor shaft)
•Speed controller: minimum 60A
(ESC specs limits should be rated accordingly to the maximum amps handling by the motor)
•Lipo Batteries: 6s 1450-2000 mAh
•Electronic flybarless system
•3 pcs swashplate +1 pcs tail servo's
•360 mm main rotor blades
•63 mm tail rotor blades(included)
•6 channel or more helicopter transmitter system, 2.4 Ghz frequency preferred
•Receiver 6 channel or more (working with your transmitter specs)

5.Specification

690mm
Page 05