Advertisement
1.INTRODUCTION
Congratulations on your purchase of the Agile A
KDS Model. Our goal was to offer you something different with a minimum of parts, easy maintenance, and outstanding
flying performances.
It's time to fly different!...
IMPORTANT NOTES
R/C helicopters, including the AGILE A
technologies to provide superior performance. Improper use of this product can result in serious injury or even death.
Please read this manual carefully before using and make sure to be conscious of your own personal safety and the
safety of others and your environment when operating all AGILE products. Agile A
authorized distributors are not responsible for personal injuries to the operators and others, and property damages that
could occur from the assembly, maintenance or your use/misuse of this product. Always respect the rules provided by
your local remote control aircraft organization.
NOTE FOR ASSEMBLY
The following manual provide important instructions to correctly assemble the model. It is structured in a logical way, based on
the work done in previous step. If you change the order, it may result in additional or unnecessary steps. So we suggest you to
read this user manual very carefully to understand correctly the assembly procedure. Failure to do so may not only downgrade
performances but also increase the risk of danger. Apply thread lock as indicated, allow the threadlock to cure before mounting
parts. It is recommended to use threadlock on each bolt or screw that are engaged with metal parts.
2.SAFETY NOTES
LOCATE AN APPROPRIATE LOCATION
R/C helicopters fly at high speed, thus posing a certain degree of potential danger. Choose an
appropriate flying site consisting of flat, smooth ground, a clear open field, or a large open
room, such as gymnasium or warehouse without obstacles. Do not fly near buildings, high
voltage cables, or trees to ensure the safety of yourself, others and your model. Do not play
your model in inclement weather, such as rain, wind, snow or darkness.
OBTAIN THE ASSISTANCE OF AN EXPERIENCED PILOT
Before turning on your model and transmitter, check to make sure no one else is operating on
the same frequency. Frequency interference can cause your model, or other models to crash.
The guidance provided by an experienced pilot will be invaluable for the assembly, tuning,
trimming, and actual first flight(recommend you to practice with computer-based flight
simulator).
ALWAYS BE AWARE OF THE ROTATING BLADES
During the operation of the helicopter, the main rotor will be spinning at a high rate of speed.
The blades are capable of inflicting serious bodily injury and damage the environment. Be
conscious of your actions, and careful to keep your face, eyes, hands, and loose clothing
away from the blades. Always fly the model a safe distance from yourself and others, as well
as surrounding objects. Never take your eyes off the model or leave it unattended while it is
turned on. lmmediately turn off the model and transmitter when you have landed the model.
-
3 remote controlled helicopter kit. Agile A
Enjoy the built and have a great time with your Agile A
-
3 are not toys. R/C helicopters utilize various high-tech products and
-
3 is proudly manufactured by
-
3 !
-
3 , KDS Model, their affiliates and
Page 01
Advertisement
