Table of Contents
Advertisement
Quick Links
Printed Matter No. 9836 9907 00
Valid from Serial No. A5700001
2014-05-01
G2427-S180 ( 18000 r/min)
Read all safety warnings and instructions
Failure to follow the safety warnings and in-
structions may result in electric shock, fire and/
or serious injury.
Save all warnings and instructions for future
reference
8423031287
WARNING
G2427 S180
Product Instructions
Die grinder
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Atlas Copco G2427 S180
Summary of Contents for Atlas Copco G2427 S180
- Page 1 G2427 S180 Printed Matter No. 9836 9907 00 Die grinder Valid from Serial No. A5700001 Product Instructions 2014-05-01 G2427-S180 ( 18000 r/min) 8423031287 WARNING Read all safety warnings and instructions Failure to follow the safety warnings and in- structions may result in electric shock, fire and/ or serious injury.
- Page 2 Table of Contents EN Product Instructions................3 © Atlas Copco Industrial Technique AB - 9836990700...
-
Page 3: Signs And Stickers
• For optimum performance and maximum product life we recommend the use of compressed air with a dew point between +2°C and +10°C. Installa- tion of an Atlas Copco refrigeration-type air dryer is recommended. © Atlas Copco Industrial Technique AB - 9836 990700 00... -
Page 4: Compressed Air Connection
Safety and operating instructions G2427 S180 • Use a separate air filter of type Atlas Copco FIL, removes solid particles larger than 15 microns and more than 90 % of liquid water, installed as close as possible to the product and prior to any other air preparation unit like REG or DIM (please see Air Line Accessories in our main catalogue). - Page 5 • Ensure the shaft diameter of the accessory is correct for the size of collet • Do not mix mm shanks with inch collets and vice versa • Observe a min of 10 mm axial grip of the shank © Atlas Copco Industrial Technique AB - 9836 990700 00...
- Page 6 (such as under a heavy work table) to stop any possible broken wheel parts. Stop immediately if vibration is excessive Correct working with the die grinder Read the Section Safety instructions before using the die grinder. © Atlas Copco Industrial Technique AB - 9836 990700 00...
- Page 7 Use lubricants of good quality. The oils and greases listed in the lubrication ta- ble are examples of lubricants that can be recommended. General purpose Brand Bearings Air lubrication Energrease LS-EP2 Energol E46 Castrol Spheerol EP L2 © Atlas Copco Industrial Technique AB - 9836 990700 00...
-
Page 8: Useful Information
• Make sure to take frequent breaks. • Avoid extreme arm or wrist postures, particularly for operations requir- ing a degree of force. © Atlas Copco Industrial Technique AB - 9836 990700 00... -
Page 9: Country Of Origin
Parts without ordering number are not delivered separately for technical rea- sons. The use of other than genuine Atlas Copco replacement parts may result in de- creased tool performance and increased maintenance and may, at the company option, invalidate all warranties. - Page 10 ServAid is available on DVD and on the web: http://servaidweb.atlascopco.com For further information contact your Atlas Copco sales representative or e-mail us at: servaid.support@se.atlascopco.com © Atlas Copco Industrial Technique AB - 9836 990700 00...
- Page 11 G2427 S180 Service instructions Service instructions Service instructions Operating instructions Free speed Model Min r/min Max r/min G2427-S180 16000 18000 © Atlas Copco Industrial Technique AB - 9836 990700 00...
- Page 12 Original Product Information Atlas Copco Industrial © Copyright 2012, Atlas Copco Industrial Technique AB. All rights reserved. Any unauthorized use or copying of the contents or part thereof is prohibited. This Technique AB applies in particular to trademarks, model denominations, part numbers and SE-10523 STOCKHOLM drawings.
Need help?
Do you have a question about the G2427 S180 and is the answer not in the manual?
Questions and answers