Redmond RMC-PM400 User Manual page 15

Problem Possible cause
A programme in the multicooker mode is running, the
steam valve is set to operate in pressure cooker mode
Display shows the error
code: Е8
A sufficient pressure level in the bowl has not been
reached when a programme in the pressure cooker
mode was running.
The appliance is not connected to the mains
Appliance does not switch
The wall socket is faulty or there is no current in the
on
mains
Power supply interruption (power supply is unstable/
underrated)
There is a foreign object between the bowl and the
Dish is taking too long to
heating element (grain, food particles, debris, etc.)
cook
The bowl is not properly positioned
Heating disk is dirty
Hot steam escapes from
under lid during cooking. The
Sealing ring is lost
count of program running
time fails
The bowl is not properly
positioned
Hot steam escapes from
Inner lid and cooking
under lid during cooking. The
The lid is not closed properly;
bowl fail to seal
count of program running
foreign object under lid
hermetically
time starts
Sealing ring is dirty, deformed,
or damaged in any way
When the device operates
Lock valve is dirty
in the pressure cooker
mode, steam keeps going
out of the hole of lock valve.
Lock valve or its sealing rubber is lost
The count of program
running time fails
In case you didn't manage to eliminate the defects, please, refer to the authorized service centre.
Environmentally friendly disposal (WEEE)
The packaging, user manual and the device itself shall be taken to the applicable
collection point for the recycling of electrical and electronic equipment. Do not throw
away the electronic waste to help protect the environment.
Old appliances must not be disposed with other household waste but must be collected
separately. Municipal disposal of recyclable wastes is free of charge. The owners of old
appliances are required to bring it to a waste facility centre. With this little extra effort, you
can help to ensure that valuable raw materials are recycled and pollutants are treated as
appropriate.
This appliance is labelled in accordance with European Directive 2012/19/EU — concerning
Solution
used electrical and electronic appliances (waste electrical and electronic equipment WEEE).
Carefully pull the steam valve upwards
The guideline determines the framework for the return and recycling of used appliances as
and remove it.
applicable throughout the EU.
Check the correct installation of the
steam valve and the appliance lid
Connect the appliance to the mains
Connect to a properly working wall
socket and check the power supply
Ensure that the power supply is stable. If
unstable/underrated, contact local
electricity supply company
Unplug the appliance and let cool down.
Remove foreign object or objects
Properly position the bowl into place
Unplug the appliance and let cool down.
Clean heating disk
Check the sealing ring
Properly position the bowl into place
Remove foreign objects (grain, food
particles, debris, etc.) from under the rim,
if any. Always close the lid until it clicks
into place
Check the sealing ring. Replace, if
necessary
Clean the lock valve according to the
Maintenance Section
Check for lock valve and its sealing
rubber
GBR
RMC-PM400
UKR
KAZ
15