PANNORAMIC® CONFOCAL RX 1.0
5 Scanning Modes and Settings
After microscope initialization, if fluorescence hardware option is provided, you can select from
the following two modes:
•
Brightfield scanning mode (see
information)
•
Fluorescence scanning mode (see
more information)
•
Option modes
o
o
o
In accordance with the selected mode, the Profile Settings Panel and the Microscope Control
Panel views are modified.
5.1 Brightfield Scanning Mode
Microscope View consist of three different sections:
•
Main functions: Located at below the window header, these functions are
identical in both modes.
•
Profile Settings panel: Profile settings containing parameters used for scanning.
•
Microscope Control Panel: Live microscope movement functions
MAY 13, 2021
FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES .
chapter 5.1 Brightfield Scanning Mode
Microscope mode (available only if Services or Settings mode is active)
Settings (see
chapter 6 Settings and services
Services (see
chapter 6 Settings and services
Figure 30: Main window of Brightfield Microscope mode
SCANNING MODES AND SETTINGS
chapter 5.2 Fluorescence Microscope Mode
for more information)
for more information)
for more
for
53