Troubleshooting - Qlima D 720 Cube Operating Manual

Hide thumbs Also See for D 720 Cube:
Table of Contents

Advertisement

Available languages

Available languages

TROUBLESHOOTING

• Check the following before contacting technical support.
Problem
Unit does not start
Dehumidifier does not
dry the air as it should
The unit makes a loud
noise when operating
Frost appears on the coils
Water on floor
EH60, EH61,EH0b ,Eb or
P2 appear in the display
4
88
What to check
Make sure the dehumidifier's plug is pushed completely into the
outlet.
Check the house fuse/circuit breaker box.
Dehumidifier has reached its preset level or bucket is full.
Water bucket is not in the proper position.
Did not allow enough time to remove the moisture.
Make sure there are no curtains, blinds or furniture blocking the
front or back of the dehumidifier.
The humidity control may not be set low enough.
Check that all doors, windows and other openings are securely
closed.
Room temperature is too low , below 5°C(41°F).
There is a kerosene heater or something giving off water vapor in
the room.
The air filter is clogged.
The unit is tilted instead of upright as it should be.
The floor surface is not level.
This is normal. The dehumidifier has Auto defrost feature.
Hose to connector or hose connection may be loose.
Intend to use the bucket to collect water, but the back drain plug is
removed.
These are error codes and protection codes. See the CONTROL PADS
ON THE DEHUMIDIFIER section.

Advertisement

Table of Contents
loading

Table of Contents