Convergence/Deflection Pcb - Hughes JVC Model 200 Service Manual

Chapter 2---System Description

2.3.9 Convergence/Deflection PCB

Model 200 Service Manual
The Convergence/Deflection Board is located on the bottom side
of the card cage under the Horizontal/Vertical Deflection Board.
This board drives the convergence coils of the projectors.
The following functions are provided by C/D Board:
•
Generation of various waveforms for the horizontal and vertical
axes
•
Height control
•
Generation of waveforms for dynamic focus
•
Various geometry correction functions for the horizontal and
vertical axes
•
Convergence output amplifiers for all colors and both
horizontal and vertical axes
•
Convergence enable and raster fill function
®
•
ILA assembly driver circuitry with temperature compensation
•
Phase locked loop for ILA
•
IIC serial bus interface
The Convergence/Deflection Input/Output diagram (Figure 2-15)
and the list of inputs and outputs (Tables 2-12 and 2-13) provide
information for the technician to perform module level
troubleshooting.
®
assembly drivers
2-51