Error Codes - Hughes JVC Model 200 Service Manual

Figure 5-4. Convergence/Deflection and Video Amplifier LEDs.

5.2 Error Codes

Table 5-1. Error Categories:
Category
Number
1
2
3
4
5
6
7
8
9
10
Model 200 Service Manual
For certain errors that may occur in the Model 200 Projector the software
provides error codes that are helpful in determining the nature of the
problem. These error codes are visible on the left side of the monitor
screen when using a PC connected to Port A or Port B.
Error Category
CEXEC
FLASH HW
IIC HANDLER
POWER ON/OFF
FLASH MANAGER
VIDEO SWITCHER
ANSI OUTPUT
UI CHAN/SRC
VIDEO INPUT CARD
HARDWARE
Chapter 5---Troubleshooting
Description
Operating System.
Flash Memory HW driver.
IIC Handler for Convergence/Deflection PCB,
Horizontal/Vertical Deflection PCB, Raster
Timing Generator PCB, Video Amplifier PCB,
Video Processor PCB.
Power On Sequencing.
Flash Memory Data Manager.
EXTRON or JVC Video Switcher Handler.
Ansi Output Display process.
User Interface VIC Configuration Handler for
Channel/SRC Data.
VIC Card Handler.
Misc HW (shutters, etc.).
5-3