Zte ZXMW NR8120A Maintenance Manual page 38

ZXMW NR8120A/8120D Maintenance Guide
Parameter
Valid Result
Source MP ID
Destination MAC
TTL
Node MAC
Hit Flag
Start Time
End Time
8. Select ETH > OAM_CFM > AIS&LCK Info from the left navigation tree. The AIS and
LCK Information pane is displayed on the right.
9. Set MD Name, MA Name, and MP ID Primary Key, and click the AIS Query button
or the LCK Query button. The query result is displayed, indicating whether there is
any AIS packet or LCK packet received, see
Figure 3-12 AIS and LCK Information Pane
SJ-20150804150350-006|2015-09-17 (R1.0)
Description
1 indicates that the result is valid while 0 indicates that the result is
invalid. An invalid result indicates that unknown errors occur during the
calculation process, causing the result invalid. Normally, the displayed
query result is valid.
Displays the MP ID configured for the end where the link trace transmit
function is initiated.
Displays the MAC address configured for the end where the link trace
receive function is initiated.
Displays the number of hops that the LTM packet can be transmitted
after the transmit end of the LTR packet receives the LTM packet. If TTL
is 0, it indicates that the LTM packet will not be transmitted any more.
Displays the MAC address of the end where the MP that sends the
LTR is located.
Indicates whether the LTM packet reaches the destination end. If it is
1, the LTM reaches the destination end. If it is 2, the LTM does not
reach the destination end. If Hit Flag of all the records is 1 and TTL is
larger than 0 (the number of records displayed is less than 20), users
can determine that the link fault is located after the source end of the
last LTR.
Displays the starting time of the test.
Displays the ending time of the test.
3-12
Figure 3-12.
ZTE Proprietary and Confidential