Bauer 2161CR-B Owner's Manual & Safety Instructions page 14

Charging
Charge battery before using this tool. Follow
instructions included with battery charger.
Workpiece and Work Area Set Up
1. Designate a work area that is clean and well-lit.
The work area must not allow access by children
or pets to prevent distraction and injury.
2. Secure loose workpieces using a vise or clamps
(not included) to prevent movement while working.
3. There must not be hazardous objects, such
as utility lines or foreign objects, nearby
that will present a hazard while working.
Grinding and Wire Brushing Instructions
TO PREVENT SERIOUS INJURY: Grip the tool firmly in both hands.
1. Make sure that the Switch Trigger is in the
off-position, then attach Battery Pack.
2. Press the back of the Switch Trigger down
and then push it forward to start the tool. To
turn the tool off, release the Switch Trigger.
3. To lock the tool in the on position, press the
back of the Switch Trigger down and then
push it forward. Then press the front end
of the Switch Trigger down. To release the
lock, press the back of the Switch Trigger.
4. Allow the tool to come up to full speed
before touching the work material.
Page 14 For technical questions, please call 1-888-866-5797.
4. You must use personal safety equipment including,
but not limited to, ANSI-approved eye and hearing
protection, as well as heavy-duty work gloves.
5. Before beginning work, provide for sparks
and debris that will fly off the work surface.
5. Apply the wheel to the work material at a 10° – 15°
angle, allowing the tool to operate at full speed.
If the tool bogs down, use lighter pressure.
6. To create a smoother surface,
keep the tool moving over the work surface.
7. TO PREVENT ACCIDENTS, AFTER USE:
Turn off the tool.
WARNING! TO PREVENT SERIOUS INJURY:
Allow the tool to come to a complete stop
before setting it down.
Remove Battery Pack. Clean, then store
the tool indoors out of children's reach.
Item 58308