Stopping And Suspending Measurements - A&D TM-2440 Instruction Manual

8.6.3. Stopping and Suspending Measurements

The A-BPM function can be suspended when necessary.
Ongoing A-BPM or manual blood pressure measurement
can be stopped immediately.
When blood pressure measurement is stopped, the stop code
E07 is displayed on the OLED and is stored in the memory.
To suspend A-BPM
Step 1. Press and hold the EVENT switch.
Step 2. The
To stop ongoing blood pressure measurement
When the START/STOP switch is pressed during blood
pressure measurement, the air is expelled immediately and
the current measurement stops.
However, A-BPM continues.The next blood pressure
measurement is performed in accordance with the A-BPM
settings.
mark is hidden. A-BPM is suspended.
Note
51