Advertisement
Specifications
Setup - Before Use:
Read the EntiRE iMpORtAnt SAFEty inFORMAtiOn section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
tO pREVEnt SERiOUS inJURy FROM ACCiDEntAL OpERAtiOn:
Make sure that the trigger Switch is in the off-position and remove the
Battery pack before performing any procedure in this section.
installing the Wheel Guard
tO pREVEnt SERiOUS inJURy: Do not operate this tool without the Wheel Guard properly installed.
1. Pull the Clamp Handle out, away from the
Grinder, to unlock and loosen the Wheel Guard.
2. Slide the collar of the Wheel Guard
over the rim of the Gear Housing.
3. Rotate the Wheel Guard as needed to
shield you during the planned work.
4. Once positioned, push to close and
lock the Clamp Handle in place.
5. Check the Wheel Guard to ensure
it is firmly in place. Adjust if
necessary before proceeding.
Page 8
Battery Type
Charger Type
No Load Speed
Spindle Thread
Wheel Diameter
For technical questions, please call 1-888-866-5797.
Bauer 20V Li-ion:
64816 (sold separately)
Bauer 20V Li-ion:
63947 (sold separately)
n
: 7000/min
0
5/8"–11 UNC
4-1/2"
Clamp Handle
Wheel Guard
Item 56401
Hide quick links:
Advertisement
