Advertisement
Operating instructions
Read the EntiRE iMpORtAnt SAFEty inFORMAtiOn section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
tool Set Up
tO pREVEnt SERiOUS inJURy FROM ACCiDEntAL OpERAtiOn:
Make sure that the trigger Switch is in the off-position and remove the
Battery pack before performing any procedure in this section.
installing a non-threaded Grinding Wheel
1. The Grinding Wheel (sold separately) MUST be:
• rated to at least 7,000 RPM
• 4-1/2" (115 mm) in diameter
• fitted with a 7/8" round arbor hole
• 1/4" (6mm) thick or less
• suitable for surface grinding, not edge grinding
• dry and clean
• proven undamaged by inspection
2. Press in and hold the Spindle Lock Button
to prevent the Spindle from turning.
3. Remove the Outer Flange.
Keep the Inner Flange in
position on the Spindle.
4. Closely inspect the Grinding
Wheel before mounting.
WARninG! tO pREVEnt SERiOUS inJURy:
Do not use worn or damaged wheels.
5. Place the Grinding Wheel onto the Spindle.
note: The Outer Flange has a step for improved
stability with thick accessories. Keep this step
on the inside for thick accessories. To allow
proper clamping for thin accessories, flip Outer
Flange so this step is on the outside.
6. Thread the Outer Flange onto the Spindle.
Wrench tighten only enough so that the wheel is
securely held on the spindle.
WARninG: to prevent serious injury,
do not overtighten flange. Overtightening can
damage the wheel, causing wheel failure.
Page 10
For technical questions, please call 1-888-866-5797.
Spindle Lock
Button
Spindle
Outer
Flange
Wheel
Guard
Grinding
Wheel
Wrench
Item 56401
Hide quick links:
Advertisement
