Present Ation - Husqvarna DM 406 H Operator's Manual

DM 406 H
It is our wish that y ou will be satisfied with your product and
that it will be your companion for a long time. Think of this
operator ' s manual as a valuable document. By following its '
content (using, service, maintenance etc) the life span and
the second-hand value of the machine can be extended. If
you ever lend or sell this machine, make sure that the
borrower or buyer gets the operator ' s manual, so they will also
know how to properly maintain and use it.
A purchase of one of our products gives you access to
professional help with repairs and services. If the retailer who
sells your machine is not one of our authorised dealers, ask
him for the address of your nearest service workshop.
Husqvarna Construction Products has a policy of continuous
product development. Husqvarna reserves the right to modify
the design and appearance of products without prior notice
and without further obligation introduce design modifications.
4 –
English
PRESENT A TION
• DM 406 is an hydraulic drill motor, intended for drilling
concrete, brick and various stone materials.
• The machine is intended for stand mounted drilling.
• The following Husqvarna drill stands are recommended
for use with the drill motor:
- DS 50 AT/ATS/Gyro/COMBO/BASIC
- DS 70 AT/ATS
- DS 450
• The machine is intended for use together with the PP 325
power unit. When used together with another power unit,
the specified max. flow and max. pressure must not be
exceeded. See instructions in the section "Technical
data".
• The drilling machine has a modular design and is easy to
assemble.
• The hydraulic motor speed can be set in three positions.
The mechanical gearbox has two gears. This makes it
possible to set 6 different spindle speeds.
• The machine has a water cooled gearbox with a pipe that
runs through the spindle.