Beko B3WFU 782C WB User Manual page 12

Table of Contents

Advertisement

Available languages

Available languages

4.1.6 Adjusting the feet
In order to ensure that the product operates more silently and vibration-free, it must stand level and balanced on its feet.
Ensure that the product is balanced by adjusting the feet. Otherwise, the product may move from its place and cause
WARNING
crushing, noise and vibration problems.
Do not use any tools to loosen the lock nuts. Otherwise, they will get damaged.
1
Loosen the lock nuts on the feet by hand.
2
Adjust the feet until the product stands level and balanced.
3
Tighten all lock nuts again by hand.
4.1.7 Electrical connection
Connect the product to a grounded outlet protected by a 16 A fuse. Our company shall not be liable for any
damages that may arise when the product is used without grounding in accordance with the local regulations.
• Connection must comply with national regulations.
• The electrical connection cable infrastructure of the product must be adequate and suitable for product
requirements. It is recommended to use a residual current device.
• Power cable plug must be within easy reach after installation.
• If the current value of the fuse or breaker in the house is less than 16 Amps, have a qualified electrician
install a 16 Amp fuse.
• The voltage specified in the "Technical specifications" section must be equal to your mains voltage.
• Do not make connections via extension cables or multi-plugs. Overheating and burning may occur due to
the connecting cable.
A
Damaged power cables should be replaced by the authorized service in order to prevent possible danger.
4.1.8 Initial use
C
Some water has remained in the product due to the quality control processes in the production. It is not harmful for the
product.
12 / EN
Before starting to use the product make sure that the preparations
described in section "Environmental instructions" and "Installation".
To prepare the product for washing laundry, perform first operation
in Drum Cleaning programme. If this program is not available in your
product, apply the method which is described in section "Cleaning the
loading door and the drum".
Washing Machine / User's Manual

Advertisement

Table of Contents
loading

Table of Contents