Fm Operation - auna Splash Manual

Time / Date
This displays the current time and date provided automatically by the
broadcaster.
DLS (Dynamic Label Segment)
Dynamic label segment is a scrolling message that the broadcaster may
include with their transmissions. The message usually includes information,
such as program me details etc.

FM OPERATION

To switch the unit to FM mode, press the SOURCE button repeatedly to
select FM mode. The display will show the frequency.
Auto scan
Press the SCAN button until the tuner starts searching for a station. After
scanning the FM band, the first 20 receivable stations will be stored in the
PRESETS.
Manual Scan
To search for FM stations manually, press the  or  ,buttons repeatedly
until your desired frequency is reached.
Scan setting
This is a scanning option to scan all stations, or just scan stations with a
strong signal.
1. Press the MENU button, then press the  or  buttons to select "Scan
setting". Press the ENTER button to confirm.
2. Press the  or  buttons to select "All stations" or "Strong stations
only". Press the ENTER button to confirm.
The asterisk shown at the top right of the display determines the currently
selected option.
Audio setting
This unit will automatically switch between stereo and mono mode, but
you can override this and switch this function manually. This can be helpful
when receiving poor signal reception.
1. Press the MENU button, then press the buttons to select "Audio setting".
Press the ENTER button to confirm.
2. Press the buttons to select "Stereo allowed" or "Forced mono" and then
EN
37