Page 1
RunCam Thumb Camera manual Please read this manual carefully before use and keep it in a safe place...
Page 2
Function indication Lens cover Standard installation direction Button (power/shutter button) Indicator light(Red/Green) MicroUSB 1.25mm 2P...
Page 3
Micro SD Card Support up to 128G, high-speed cards (above Class10) are recommended MicroSD Card Step 1 Step 2...
Page 4
Camera connection operation Step 1: Camera power connection SpeedyBee f7 mini pro flight controller Step 2: Camera operation Connect to the power supply Short press the power/shutter button Boot into recording mode to turn on directly to start/stop video recording...
Page 5
Note: If it cannot be recognized after connecting to the computer, please confirm that there is a microSD card inserted in the Runcam Thumb; if the files in the microSD card cannot be read normally, please replace the USB cable or the computer USB...
Page 6
Manually copy the firmware file (Thumb.bin) to the root directo microSD card. For specific steps, please refer to: https://runcam.com/download/Thumb. If you want your Runcam Thumb to get the latest features and pe make sure that the camera software you are using is the latest Gyroscope Data Generated Function Create a csvopen.txt file manually to the root directory of the camera's microSD card.
Page 7
Parameters Table Product Name Runcam Thumb Resolution 1080P@60FPS Video Format Gyro Built-in Communication Interface Micro USB Support Micro SD Card Capacity 128G Max USB Power Input/Terminal Power Supply 5.0V Power Consumption 280ma@5V Net Weight 9.8g...
Need help?
Do you have a question about the Thumb and is the answer not in the manual?
Questions and answers