Operation; Quick Start - Teka LSI6 1480 User Manual

OPERATION

Quick Start

Caution!
• Before washing, please make sure the washer dryer is installed properly.
• Your appliance was thoroughly checked before it left the factory. To remove
any residual water and to neutralize potential odors, it's recommended to
clean your appliance before first use. For this reason, start the Cotton program
at 90°C without laundry and detergent.
Calibration
It's recommended to calibrate the washer dryer, so that provide the best
performance.
The appliance is able to detect the amount of laundry loaded. This function is
optimizing the product performance by minimizing energy and water
consumption, saving you money and time. For this reason it's recommended to
calibrate the appliance for best use.
1- Remove all accessories from the drum and close the door;
2- Insert the mains plug to the socket;
3- Switch on the washer dryer and press "Speed" and "
for 10 seconds until "t19" is displayed;
4- Press [ ] to start the appliance and wait till "****" is displayed.
Delay
13
" simultaneously