Functions Of The Mechanism Under The Service Mode; Normal Mode - JVC KD-LX30R Service Manual

Functions of the mechanism under the service mode

With the three error modes stored in maximum in the internal memory of the mechanism in the body of this
system, it is posible under the service mode to call the contents of error according to the following steps when
any error has occurred.
Press the three buttons (UP button
service modes. After changing over to the service mode, press the UP button
change the mode. For executing the respective service modes, press the SEL button.
With the service mode 2 , it is possible to call the error codes of the mechanism.

NORMAL MODE

DELEEPROM
CD-CH ERR
DEL CH-ERR
RUNNING
DELDATA
CD-ERR
)+( button)+(Func button
(UP button
: Deletion of entire EEPROM data. This mode is used when
shipping this system from factry.
: This mode is used only when the CD changer is connected.
: This mode is used only when the CD changer is connected.
: Running mode (Do not use this mode under the servise mode)
: (Deletion of CD error code and RDS data)
: Calling of CD mechanism error code
Data stored in EEPROM
1. RDS data
2. CD mechanism error cord
3. Station name (to be input by user)
4. DISC name (to be input by user)
5. AUX input name (application only to KD-LX30)
*Any data 3 to 5 above should not be deleted.
SEL 2 MODE
1 3
). Then it is possible to select the follwing
) + ( button) + (
SOURCE PTY
DISP RDS
and DOWN button
button) at the same time.
5 OFF/
4 6
to