7.3.9 Troubleshooting the process power supply
Location
The process power supply, DSQC 609, is located as shown in the figure below.
xx2100000499
Product manual - OmniCore V250XT
3HAC073447-001 Revision: B
CAUTION
If there are two or more power supply units mounted in a row and too close to
each other, there will be a heating problem and the units can be damaged.
To avoid damaging the power supply units, the units must be separated with 3
pcs of exterior support.
© Copyright 2020-2022 ABB. All rights reserved.
7.3.9 Troubleshooting the process power supply
7 Troubleshooting
Continues on next page
401