Zline ATTAINABLE LUXURY RFM-W-36 Installation Manual And User's Manual page 9

INSTALLATION
INSTALLING DOOR HANDLES
Precautions should be taken to prevent the handle from falling and
causing personal injury.
CAUTION
1. Screw in anchors to the door with
Philips head screwdriver.
Refrigerator
door handle
Refrigerator
door handle
2. Line up and fit the handle into the
Handle screw
top and bottom door anchors.
Hole for
door anchor
Refrigerator
door handle
3. Using an Allen wrench, secure in the
top and bottom handle screws to the
door anchors.
REMOVAL OF DOOR HANDLES
Remove screw and pull hand outward.
1 1
Refrigerator Refrigerator
door handle door handle
Handle screw
Refrigerator
Hole for
door handle
door anchor
Handle screw
Hole for
door anchor
Handle screw
Hole for
door anchor
Location of anchor screws
Handle screw
Hole for
door anchor
Location of anchor screws
INSTALLATION
ADJUSTMENT OF SHELVES
• The shelves can be adjusted to multiple heights.
• Adjust the shelves by following the arrows as shown in the diagram. Raise it
Handle screw
upward first and then take it out by tilting it upward. During installation, put the
Hole for
upper end of the fixed leg into one of the upper slots on the supporting iron first
door anchor
and then put the lower end of the fixed leg into the slot below top leg.
Location of anchor screws Location of anchor screws
Location of anchor screws
HEIGHT ADJUSTMENT AND CLEANING OF DOOR-MOUNTED RACK
• Raise the rack in the direction of Arrow 1 and pull it in the direction of Arrow 2.
• After cleaning, you can install the rack by reversing the directions above. You
Location of anchor screws
can also adjust the height of the rack.
12