Zline ATTAINABLE LUXURY RFM-W-36 Installation Manual And User's Manual page 18

Drawing and stretching variable temperature drawer
Open the variable temperature door to the maximum stroke, hold the left and right sides of the variable temperature
drawer with both hands, lift the tail, exert a little force to pull the whole drawer back for about 15mm until the support
MAINTENANCE AND CLEANING
claw of the slide rail is separated from the drawer, then lift the front end of the drawer at a certain angle, hold the drawer
4.3 Cleaning of drawers
and move horizontally to the inside of the chamber, and then rotate it back and up to remove the drawer.
Drawing and stretching variable temperature drawer
Open the variable temperature door to the maximum stroke, hold the left and right sides of the variable temperature
drawer with both hands, lift the tail, exert a little force to pull the whole drawer back for about 15mm until the support
UPPER FREEZER DRAWER
claw of the slide rail is separated from the drawer, then lift the front end of the drawer at a certain angle, hold the drawer
• Open the freezing chamber door to the maximum length.
and move horizontally to the inside of the chamber, and then rotate it back and up to remove the drawer.
• Lift the end of the upper drawer of the freezing chamber, pull the slide rail so that
it can not move, and push the drawer forward to separate the drawer from the
support hinge of the slide rail.
• Separate the drawer from the support hinge on the side of the slide rail with the
Upper freezer drawer
same method.
Open the freezing chamber door to the maximum stroke, lift the tail of the upper drawer of the freezing chamber,
pull the slide rail so that it can not jump, push the drawer forward to separate the drawer from the support claw of the • Rotate the drawer it back and up to remove it after the slide rail support is
slide rail. Separate the drawer on the side from the support claw of the slide rail with the same method.
separated from the drawer.
Rotate the drawer it back and up to remove it after the slide rail support is separated from the drawer.
Upper freezer drawer
Open the freezing chamber door to the maximum stroke, lift the tail of the upper drawer of the freezing chamber,
pull the slide rail so that it can not jump, push the drawer forward to separate the drawer from the support claw of the
slide rail. Separate the drawer on the side from the support claw of the slide rail with the same method.
Rotate the drawer it back and up to remove it after the slide rail support is separated from the drawer.
Upper freezer drawer
Open the freezing chamber door to the maximum stroke, hold the left and right sides of the lower drawer of the freezing
LOWER FREEZER BASKET
chamber, lift the tail of the drawer to pull the whole drawer about 15mm to the external side of the chamber until the
• Open the freezing chamber door to the maximum length.
sliding rail support claw is separated from the drawer, and rotate the drawer back and up to take it out.
• Hold the left and right sides of the lower drawer of the freezing chamber
• Lift the end of the drawer to pull the whole drawer about 5/8" to the external
Upper freezer drawer
Open the freezing chamber door to the maximum stroke, hold the left and right sides of the lower drawer of the freezing
side of the chamber until the sliding rail support hinge is separated from the
chamber, lift the tail of the drawer to pull the whole drawer about 15mm to the external side of the chamber until the
drawer and rotate the drawer back and up to take it out.
sliding rail support claw is separated from the drawer, and rotate the drawer back and up to take it out.
29
22
22
MAINTENANCE AND CLEANING
4.4 Cleaning of ice storage box
When you need to use a lot of ice, or take ice abnormally, or need to clean the ice storage box, you can take out
the ice storage box, but please put it back in time.
4.4 Cleaning of ice storage box
CLEANING ICE BUCKET
When you need to use a lot of ice, or take ice abnormally, or need to clean the ice storage box, you can take out
When you need a lot of ice or you need to clean the ice bucket, you can take out the the ice storage box, but please put it back in time.
ice bucket. Always remember to put it back.
1. Hold the button of the ice storage box with your hand, press it gently, and then pull it out horizontally;
1. Hold the handle of the ice bucket with your hand, press it gently, and then pull it
1. Hold the button of the ice storage box with your hand, press it gently, and then pull it out horizontally;
out horizontally;
2. Push the ice bucket in slightly after cleaning.
2. Push the ice storage box in slightly after cleaning.
Note: Remove ice that may have been dispensed when ice bucket was out.
Note: Please remove the ice in time which falls in the ice making chamber during pulling out.
2. Push the ice storage box in slightly after cleaning.
CHANGING THE LIGHT
Note: Please remove the ice in time which falls in the ice making chamber during pulling out.
Any replacement or maintenance of the LED lamps is intended to be made by a
professional.
23
23
30