Zline ATTAINABLE LUXURY RFM-W-36 Installation Manual And User's Manual page 7

BEFORE INSTALLATION
STARTING UP THE APPLIANCE
• Before use, remove all packing materials, including bottom cushions, foam pads,
and tape inside of the refrigerator. Tear off the protective film on the doors and
the refrigerator body.
• Before powering on initially, keep the refrigerator still for two hours before
connecting it to power supply.
• Before putting in any fresh or frozen food, the refrigerator should be run for 2-3
hours or for over 4 hours in summer when the ambient temperature is high.
PLACEMENT
• Leave enough space to open the doors.
• Keep away from heat and avoid direct sunlight. Do not place the freezer in moist
or damp places to prevent rust or reduction of insulating effect.
• Do not spray or wash the refrigerator. Do not put the refrigerator in moist places
where it can be easily splashed with water, so as not to affect the electrical
insulation properties of the refrigerator.
• The refrigerator should be placed in a well-ventilated indoor place and the
ground shall be flat and sturdy (rotate left or right to adjust the adjustable leg for
leveling, if unstable).
• The top space of the refrigerator shall be greater than 1 1 3/16", and the
refrigerator should be placed against a wall with a free distance more than
3 1/16" to facilitate heat dissipation.
7
BEFORE INSTALLATION
B
C
A
F
Code Size (in)
Height A 69 13/16
Width B 35 13/16
Depth without doors C2 24 7/16
Depth with handles C1 30 15/16
Depth C
Door open 90° depth D 43 3/16
Door open 90° width E 44 4/16
Door open 122° depth F 42 3/16
Door open 122° width G
C1
D
E
G
29
60
8