Table of Contents
Advertisement
Alignment and Adjustment
5-2-2 Tape Transport System Adjustment
When parts are replaced, perform the required adjustments by referring to precedures for the tape transport
system. If there are any changes to the tape path, first run a T-120 tape and make sure excessive tape wrinkle does
not occur at the tape guides.
1) If tape wrinkle is observed at the guide roller S, T, turn the guide roller S, T until wrinkle disappears.
2) If the tape wrinkle is still observed at the tape guide, perform the tilt adjustment of the ACE head.
(1) ACE Head Assembly Adjustment
Test point :
TP601 (Control Pulse)
TP602 (H
D S/W -Trigger)
'
TP301 (Envelope)
TP302 (Audio output)
TP303 (Video output)
Test tape :
ST-N1
BLANK TAPE : T-160
5-4
All manuals and user guides at all-guides.com
AUDIO OUTPUT
ENVELOPE
HEAD SWITCHING
Fig. 5-5 Location of Test point (Main PCB-Top View)
Toshiba
Advertisement
Table of Contents
