Table of Contents
Advertisement
Disassembly and Reassembly
1-2-9 Gear Loading Drive, Slider Cam,
Lever Load S, T Ass
1) Remove the Belt Pulley. (Refer to Fig. 4-35)
2) Remove the Gear Loading Drive Πafter releasing
Hook [A] in the direction arrow as shown in detail
drawing.
3) Remove the Slider Cam ´.
4) Remove the Lever Load ˇ, Link Load ˆ & Lever
Load ¨, Link Load Ø.
HOOK(A)
SLIDE CAM
´
Fig. 4-18 Gear Loading Drive, Slider Cam,
Lever T, S Load Ass
4-10
All manuals and user guides at all-guides.com
y Removal
'
GEAR LOADING DRIVE
Œ
LEVER LOAD T
¨
LINK LOAD T
Ø
LEVER LOAD S
ˇ
LINK LOAD S
ˆ
y Removal
'
1-2-10 Gear Loading Drive, Slider Cam,
Lever Load S, T Ass
1) When reinstalling, be sure to align dot of Lever
Load T Ass'y Œ with dot of Lever Load S Ass'y ´
as shown in drawing, (Refer to Timing Point 1).
2) Insert the Pin A,B,C,D into the Slider Cam ˇ hole,
3) Be sure to align dot of Lever Load T Πand dot of
Gear Loading Drive ¨, (Refer to Timing Point 2).
4) Aline dot of Gear Loading drive ¨ with mark of
Slider Cam ˇ as shown in drawing(Refer to
Timing Point 3).
TIMING POINT 1
LEVER LOAD T
Œ
TIMING POINT 2
TIMING POINT 3
PIN A
PIN C
Fig. 4-19 Gear Loading Drive, Slider Cam,
Lever Load S, T Ass
y Assembly
'
LEVER LOAD S
´
LEVER LOAD T
LEVER LOAD S
PIN D
PIN B
SLIDER CAM
ˇ
y Assembly
'
Toshiba
Advertisement
Table of Contents
