Table of Contents
Advertisement
5. Alignment and Adjustment
5-1 Reference
1) X-Point (Tracking center) adjustment, "Head switching adjustment" and "NVRAM option setting" can be adjusted with remote control.
2) When replacing the Micom (IC601) and NVRAM (IC605 ; EEPROM) be sure to adjust the "Head switching adjustment" and
"NVRAM option setting".
3) When replacing the cylinder ass'y, be sure to adjust the "X-Point" and "Head switching adjustment".
4) Remote control used for same chassis as a accessory is available for all adjustments.
5) How to adjustment.
- Press the "SW703" button on Main PCB to set the adjustment mode.
- If the corresponding adjustment button is pressed, the adjustment is performed automatically.
- If the adjustment is completed, be sure to turn the power off.
5-1-1 Location of adjustment button of remote control
X-Point (Tracking Center)
Adjustment
NVRAM Option Setting
Head Switching Adjustment
Toshiba
All manuals and user guides at all-guides.com
DISP.
EJECT.
1
2
4
5
8
7
SOURCE
0
INDEX
COMPT./RESTE
IM/IM
ENRG.
MENU
LECT.
RET.RAP.
CURSOR
RALENTI
ARRET
STD/DBL
PROG.
AUDIO
DOUB.SON
MONIT.SAT.
CONT.SAT.
VT-752EF
Fig. 5-1
MARCHE
3
PROG.TV
6
9
AJUST.
AUTO.
AV.RAP.
PAUSE /AR.IMAGE
OK
TV/VIDEO
IMAGE
5-1
Advertisement
Table of Contents
