Siemens SICAM Q80 Operating Instruction page 41

Power quality recorder

Hide thumbs Also See for SICAM Q80:

Table of Contents

11.2.5.5 SYNC terminal

For synchronization of the SICAM Q80 7KG8080 units by DCF77 or IRIG-B, the device has a

termination labeled SYNC. Find more information about setup and configurations in section

Synchronisation

One screw terminal comes standard. For other connection accessories, see the

Note

11.2.5.6 RS232 Connection for external modem

By means of this DSUB-9 terminal, an external modem (RS232) can be connected. For modem

operation, the SICAM Q80 7KG8080 can be configured as a PPP-server, see also System manual of the

software SICAM Q80 Manager.

Pin configuration of the modem terminal

11.2.5.7 Slot for CF-card

SICAM Q80 7KG8080 uses COMPACT FLASH (CF) cards exclusively as removable storage media.

For legacy reasons, the CF card is sometimes displayed as "Removable storage(PCMCIA)".

CF-cards with volumes of up to 16 GB can be used at this time. When exchanging the CF-card, the

device must be previously notified by pressing the button directly below the CF-card slot. When the

Status-LED flashes, this indicates the device is ready for exchanging the CF-card. Then the CF-card

can be exchanged.

Please note the information to the

Note that devices whose production date is earlier than May, 2012 were equipped with a SMB

socket or BNC socket.

Connections and Conditioning

internal disk.

Power Quality Recorder SICAM Q80 7KG8080, Operating instruction

Order data

E50417-B1074-C419-A2, Release 12.01.2015

E-41

Table of Contents