Sharp VL-E610S Service Manual page 7

3-2. Disassembly of the VCR main body
1. Removal of the VCR lid shaft
(1)Remove one screw ((j)LX-HZ0063TAFC).
(2)Bring the jig (example: slotted precision screwdriver) into contact with the removal groove of the VCR lid shaft, and slide
the screwdriver with care to prevent injuring the VCR lid and frame V.
(3)Pull out the VCR lid shaft head which projects beyond the surface of the VCR lid.
2. Disassembly of the cabinet L
(1)Slide the "VCR lid knob" in the arrow direction, and slide the VCR lid in the arrow direction as far as the cabinet L
fastening screw is visible. (Left figure) Since the connector of the microphone is still connected, take care to prevent
excessively sliding the VCR lid.
(2)Remove five screws ((b)LX-HZ0018TAFF).
Detail of area A
(b)
3-3
VL-E610S/VL-E610H
VL-E660S/VL-E96E
VL-E98E
Area A
(j)
VCR lid
Frame V
VCR lid shaft
VCR lid shaft
VCR lid
VCR lid knob