Lcd Display - Siemens FC2005 Installation, Operation And Maintenance Manual

LCD Display

A 160 by 64 dot LCD display is used to display information such as event types, event amount,
event location, user level, releasing timer, etc. A back light is included in the display to assure
visibility in dim light. To save power, the back light is only activated during a reported event or
on operation of a display control button.
The LCD display has altogether 7 lines, and each line displays 26 characters. It displays two
events at a time. Users can cycle through a circular list once the first event or last event
message is reached.
LCD display in Canada
The text displays in the below graphic and table is just an example. The actual display
corresponds to the actual situation.
Line Current text
1 Alarm
01/03
L1
11:15
2 V
ALM
ManualAlarm
Manu
3 al Alarm Zone1
I
4 V
ALM
ManualAlarm
1234
5 567890123456789012345678.
I
6, 7 003 ALM
004 SUP
006 TBL
000 OTH
RCtl1:60
RCtl2:60
Description
Current event type
Current event/total events
Access level
System time
Possible display:
V: The event is acknowledged
!: The event is unacknowledged
Current event type
Specific current event type
Connects to the content in line 3
Event location (see complete information together with the last 4
characters in line 2)
Possible display: I/O (in or out flag)
Possible display:
V: The event is acknowledged
!: The event is unacknowledged
Current event type
Specific current event type
Connects to the content in line 2
User defined (Max. 30 characters; see complete information
together with the last 4 characters in line 2)
Possible display: I/O (in or out flag)
Alarm event amount
Supervisory event amount
Trouble event amount
Other event amount
Releasing timer name and releasing count down time (60 s by
default; Max. 60 s; DIS (discharge) is displayed after count
down.)
72
firealarmresources.com