Siemens FC2005 Installation, Operation And Maintenance Manual page 86

Scenario 4 – Can/Can
Alarm Event is set to Can Report on Account 1 and
Account 2. Panel succeeds on Account 2 before Account
1.
Step 1:
Panel goes into alarm.
Step 2:
Panel tries to send event
to Account 1, but is
unsuccessful.
Step 3:
Panel keeps trying to send event to Account 1 until the programmed Number
Of Attempts has been reached.
Step 4:
Panel switches to Account
2 and successfully
transmits the event.
Done.
Note: The same sequence of events would happen if Account 2 was set to
Must Report.
N Account 1
Account 2
Account 1
Y Account 2
81
firealarmresources.com