1.1
Introduction ........................................................................ 2
1.2
1.1 INTRODUCTION
The following document provides instructions on how to install the Imax Xtra 2 motorised flue damper.
1.2 FLUE DAMPER KIT PARTS
The kits consist of the following parts:
1. Motorised flue damper - Shown in Fig.1.
Note: The 150mm diameter motorised flue damper is for use with 80kW,
120kW and 160kW Imax Xtra 2 boilers. The 200mm diameter motorised flue
damper is for use with 200kW, 240kW and 280kW Imax Xtra 2 boilers.
1.3 INSTALLING THE MOTORISED FLUE DAMPER INTO THE FLUE
The motorised flue damper has a chamfer on the male end for inserting into a flue piece and a lip seal on the female end to
receive another section of flue.
2
INSTRUCTIONS
CONTENTS
1.3
1.4
Fig. 1
The flue damper is to be installed in
the vertical flue section before the
common flue header.
IMAX XTRA 2 -
Flue Damper Kit Instructions