Operation Of The Buttons - Electrolux NEAT Service Manual

1. "FABRICS" button
Press this button to select the washing programme suitable for the
fabrics to be washed.
The LED corresponding to the selected washing programme lights.
The machine proposes the standard programme for the type of fabric
selected; a temperature and the maximum spin speed for the selected
programme are displayed, as well as the normal soiling level.
However, these parameters can be modified by pressing the
corresponding buttons. The display will also show the duration of the
selected programme, which is calculated according to the maximum
load for each type of fabric, and the START/PAUSE LED begins to
flash.
The type of fabric can be modified at any time during the washing cycle; in this case, the phase currently
being performed will restart from the beginning.
The table below shows the options that the user can select for each model.
LED
L1
L2
L3
L4
L5
Hand wash
If this programme is selected (certain models only), the washing cycle will be especially delicate, and can be
used for fabrics labelled "Hand Wash".
2. "TEMPERATURE" button
If a temperature different from the standard temperature proposed by
the appliance is desired, press this button repeatedly to increase of
decrease the temperature. The corresponding LED will light.
The maximum temperature is 90°C for cotton, 60°C for synthetics,
40°C for delicate fabrics, wool and hand washing.
The temperature button is effective only after the type of fabric has
been selected.
The temperature can be modified at any time during the washing cycle
("START/PAUSE"); in this case, the phase will restart from the
beginning.
LED
L6
L7
L8
L9
L10
TSE-P 04.00 EB
Type A
Cotton
Synthetics
Delicate fabrics
Wool
Hand wash
Type A
90º C
60º C
40º C
30º C
Cold wash
Type B
Cotton
Synthetics
Delicate fabrics
Hand wash
Mini
Type B
90º C
60º C
50º C
30º C
Cold wash
5/50
Type C
Cotton
Synthetics
Delicate fabrics
Wool
------
Type C
90º C
60º C
50º C
40º C
30º C
599 34 22-16