Electrolux NEAT Service Manual page 11

Þ Rinse hold: the appliance stops with water in the tub at the end of
programmes for which the RINSE HOLD option has been selected; the
display shows a zero (fixed, not flashing).
Þ End of cycle: indicated by a zero (flashing) and, at the same time,
the door pilot lamp switches off. The zero re-appears when the
appliance is switched on again, if the previous programme has not
been cancelled. It may occur, when the appliance is switched on for
the first time, that a flashing zero is shown on the display and the
acoustic signals are activated. This is due to the fact that the machine
has performed a washing cycle during testing in the factory which has
not been cancelled on completion.
Þ Delayed start, which is selected using the DELAYED START button.
The countdown starts when the START/PAUSE button is pressed,
and is decremented at intervals of one hour.
Þ An incorrect option selection is signalled by Err on the display if the
function selected is not compatible with the programme. The buzzer
also sounds when an incorrect option is selected.
Þ An alarm code indicates a machine malfunction.
12. ON/OFF button
Press the ON/OFF button to switch the appliance ON. The display shows three flashing hyphens or a
flashing zero. Press the same button to switch the appliance OFF.
The ON/OFF button is an individual pushbutton, and is not part of the display board.
EXCLUSION OF THE BUZZER AT THE END OF THE PROGRAMME
By pressing the "TEMPERATURE" and "SPIN"
buttons at the same time (or the temperature button
with button 4) it is possible to disactivate the buzzer
sound which indicates the end of the programme; by
repeating this operation the buzzer will be activated
again.
This function is always available and is memorized
until it is modified.
TSE-P 04.00 EB 11/50 599 34 22-16