Garmin G1000 Maintenance Manual page 94

____________________________________________________________________
5.1.6.9 GIA Configuration Advisory Messages
Advisory Message
GIA1 CONFIG – GIA1
configuration error. Config
service req'd.
GIA2 CONFIG – GIA2
configuration error. Config
service req'd.
GIA1 CONFIG – GIA1 audio
config error. Config service
req'd.
GIA2 CONFIG – GIA2 audio
config error. Config service
req'd.
HW MISMATCH – GIA hardware
mismatch. GIA1 or GIA2
communication halted.
Page 5-48
Rev. A
Possible Cause
The G1000 has detected a
GIA configuration mismatch.
The G1000 has detected a
GIA audio configuration
mismatch.
The G1000 has detected a
non-WAAS GIA 63.
Recommended Actions
•
Reload GIA Configuration files
including optional equipment
configuration files that list GIA 1
or 2 in the PRODUCT box on
the System Upload page.
•
Replace master configuration
module, check config module
harness for faults and replace if
necessary.
NOTE
New Terrain/Obstacle cards,
Jeppesen Aviation Database
and other optional features (i.e.
TAWS unlock card) will need to
be replaced if the master
configuration module is
changed. The G1000 System
ID number will change to a new
number when installing a new
master config module. The old
Terrain and other cards will no
longer work as they will remain
locked to the old System ID
number.
•
Reload GIA Audio software and
configuration files.
•
Replace master configuration
module, check config module
harness for faults and replace if
necessary.
NOTE
New Terrain/Obstacle cards,
Jeppesen Aviation Database
and other optional features (i.e.
TAWS unlock card) will need to
be replaced if the master
configuration module is
changed. The G1000 System
ID number will change to a new
number when installing a new
master config module. The old
Terrain and other cards will no
longer work as they will remain
locked to the old System ID
number.
Replace GIA63 with a WAAS unit.
G1000 System Maintenance Manual
190-00903-00