Table of Contents
Advertisement
aircraft immediately, it is desirable that it be repackaged using the original Enviro
Systems packaging.
13.4.1.4.
aircraft immediately and the original packaging is not available for repackaging, ensure
that the component is packaged in the following manner.
13.4.1.5.
contamination.
13.4.1.6.
tight. Ensure that a small desiccant bag is placed into bag prior to sealing. This will aid in
keeping the component moisture free.
13.4.1.7.
assembly into a protective container such as a box to prevent damage.
Copyright © 2020
Page | 49
If the component is removed from the original packaging and is not installed on the
Ensure duct or refrigerant openings are capped to further protect the component from
Slide the evaporator module assembly into a durable clear plastic bag and seal air
It is desirable at this point, to place the covered and sealed evaporator module
Original Release
12037 N Highway 99
Seminole, OK 74868
Phone (405) 382-0731
www.enviro-ok.com
passenger
www.safran‐
ATA 21‐00‐60
‐solutions.com
Advertisement
Table of Contents
