Stoelting F231 Service Manual page 28

https://appliancetechmanuals.com
E. Machine Statistics (5 of 10)
The Machine Statistics screen 5 of 10 gives the estimated
serve amount of the freezing cylinder based on the time
the spigot is open during serve mode. The estimation is
also calculated for the previous day and the previous week.
The screen gives an option to reset the serve amount and
shows when the last reset was done.
F. Machine Statistics (6 of 10)
The Machine Statistics screen 6 of 10 shows the total
run time for the compressor and counts the total cycles.
There is an option to reset the timer and the screen shows
when the last reset was done. The reset should be used
if the compressor is changed.
G. Machine Statistics (7 of 10)
The Machine Statistics screen 7 of 10 shows the total run
time for the drive motor and counts the total cycles. There
is an option to reset the timer and the screen shows when
the last reset was done. The reset should be used if the
drive motor is changed.
H. Machine Statistics (8 of 10)
The Machine Statistics screen 8 of 10 shows the total run
time for the pump and counts the total cycles. There is
an option to reset the timer and the screen shows when
the last reset was done. The reset should be used if the
pump is changed.
I. Machine Statistics (9 of 10)
The Machine Statistics screen 9 of 10 shows the amount
of time the pump hose has been in use and when the
last reposition was completed. There is also an option to
reset the hose timer.
The hose timer must be reset each time the hose is
repositioned or replaced to keep an accurate record
of the hose service time.
J. Machine Statistics (10 of 10)
The Machine Statistics screen 10 of 10 shows when the
machine was last powered on. The screen also gives an
average power consumption per day.
20
NOTE