Event Log Configuration - Advantech PCM-3363 User Manual

Power Management/APM
Enable or disable APM.
Power Button Mode
Power on, off, or enter suspend mode when the power button is pressed. The follow-
ing options are also available.
Restore on AC power Loss
Use this to set up the system response after a power failure. The "Off" setting keeps
the system powered off after power failure, the "On" setting boots up the system after
failure, and the "Last State" returns the system to the status just before power failure.
Resume On PME#
Enable / Disable PME to generate a wake event.
Resume On RTC Alarm
Enable / Disable RTC to generate a wake event.
3.3.8

Event Log Configuration

View Event Log
View all unread events on the event Log.
Mark all events as read
Mark all unread events as read.
Clear Event Log
Discard all events in the event Log.
PCM-3363 User Manual
Figure 3.14 Event Log Configuration
26