Chapter1：Product Introduction - Piesia N-BOX-J1 Manual

1.1 Product Introduction
N-BOX-J1 is a thin passenger plane with our BT19NA standard low-power Nano-ITX (12 * 12) industrial
motherboard, which uses Baytrail-D / I / M series processors. The main features are as follows;
On-board CPU, supporting Baytrail-I / D / M series processors.
1 DDR3 SODIMM 204 Socket, supporting up to 8GB DDR3L memory.
On-board 32/64 / 128G EMMC high-performance flash memory chip (optional).
Onboard 2 Intel I211AT Gigabit network cards.
On-board HDA ALC662, providing MIC / LINE-OUT and AUDIO pin headers.
Support SPDIF digital audio interface.
1* RJ45 COM interface
1* Mini-PCIE card connector (only supports PCIE signal equipment).
1* Mini-SATA card slot.
1* SATA 2.0 hard disk interface.
1* USB 3.0 interface, 3* USB 2.0 interfaces
Supports HDMI output.
Support DP output.
Two 3-Pin FAN interfaces.
1* boot button with power indicator, 1* reset button, 1 power indicator, 1 hard disk indicator.
1* IR infrared receiving port.
Single input DC power supply, DC12-19V, +/- 5% (If you do not use 12V to power the hard disk, +/- 10%).
Support AT / ATX power on mode selection.
The machine can work stably in a wide temperature range of -20-60 ℃, 0% ~ 90% relative humidity,
non-condensing, and humidity, meeting industrial grade
Various application needs of the product.
This product combines the advantages of stable and reliable industrial-grade product performance and
intelligent digital multimedia players, which can be widely used in digital
凝聚物联智慧 引领智能地球
深圳市派勤电子技术有限公司
Chapter 1: Product Introduction
www.piesia.com
此内容仅供参考，最终解释权归本公司所有
第 6 页 共 42 页