Table of Contents
Advertisement
深圳市派勤电子技术有限公司
Tips;
1. For motherboards that are not ready to be installed, they should be stored in anti-static protective
bags.
2.Before removing the motherboard from the packaging bag, place your hand on a grounded metal object
for a while to release static electricity from your body and hands.
3. Prior to use, the motherboard should be placed on a stable surface.
4. Please keep the motherboard dry. The open slots of the heat sink are used for ventilation to avoid
overheating of the components inside the chassis. Do not cover or block such openings.
5. Before connecting the motherboard to the power supply, please confirm the power supply voltage
value.
6. Please place the power cord in a place where it will not be trampled, and do not stack anything on the
power cord.
7. Before you connect or disconnect any equipment, make sure that all power cords have been unplugged
beforehand.
8. In order to avoid electric shock or product damage to the human body, the AC power supply must be
turned off or the AC power cord must be unplugged from the power outlet each time the whole machine
or board is unplugged or reconfigured.
9. Please pay attention to all cautions and warnings mentioned in the manual.
10. In order to avoid unnecessary damage to the product caused by frequent power on / off, you should
wait at least 30 seconds before turning on the machine after shutdown.
11. An abnormal situation occurs during the use of the equipment, please find a professional to deal with
it.
12. Please do not operate the equipment at an ambient temperature higher than 70 ° C, otherwise it
will cause damage to the equipment.
Caution; danger of explosion if battery is incorrectly replaced. Be sure to use the same type or equivalent
type of battery recommended by the manufacturer.
凝聚物联智慧 引领智能地球
第 3 页 共 42 页
www.piesia.com
此内容仅供参考，最终解释权归本公司所有
Advertisement
Table of Contents
