Fp1; Rtc1; Jp2 - Piesia N-BOX-J1 Manual

3.4.4 FP1

FP1 control panel interface, using 2x5, 2mm pin headers, integrated HDD_LED, PWR_LED, boot switch,
reset switch, SPEAKER function. Defined as；
F_PANEL1
1，3
2，4
5，7
6，8
9，10

3.4.5 RTC1

RTC1 is the RTC clearing jumper, which uses 1x2 and 2mm pin headers, as defined below;
RTC1
Close
Open

3.4.6 JP2

JP2Select the jumper for the power-on mode. When Close is selected, the DC power is turned
on and the motherboard is powered on.。
PS_ON
Close
Open
凝聚物联智慧 引领智能地球
深圳市派勤电子技术有限公司
Hard disk read and write indicator positive and negative signal pins.
Main power indicator positive and negative signal pins.
Mainboard reset signal positive and negative signal pins.
Positive and negative signal pins of the main board switch signal.
Spare buzzer interface.
Function Description
Clear RTC CMOS
Noraml
Boot mode selection
AT power on mode
ATX Power On Mode
www.piesia.com
Pin definition
此内容仅供参考，最终解释权归本公司所有
第 19 页 共 42 页