Ddr3; Usb 3.0 - Piesia N-BOX-J1 Manual

3.5 Interface Introduction
Please read this manual carefully before connecting external connectors to avoid damage
to the motherboard!
3.5.1 DC_IN3, DC_IN1, DC_IN2
DC_IN3 is a standard DC-JACK interface. DC_IN1 and DC_IN2 use Huilin, WF11C-5.0-2P, 2Pin,
green interface. Pay special attention to the positive and negative poles of the power supply,
and the positive and negative marks on the reverse side of the motherboard.
Note: When assembling, testing, and using, the equipment and cables must be installed
before power can be applied.

3.5.2 DDR3

Standard DDR3L memory socket, supports up to 8GB DDR3L (1066 / 1333MHz)。
The USB interface supports plug-and-play and hot-swap functions, allowing users to connect
or disconnect devices without turning off the computer. The pin definitions are as follows
Pin
1
2
3
4
5
6
7
8
9
凝聚物联智慧 引领智能地球
深圳市派勤电子技术有限公司
3.5.3 USB
;

USB 3.0

+5V_USB
USB_DATA-
USB_DATA+
GND
USB_SSRX-
USB_SSRX+
GND
USB_SSTX-
USB_SSTX+
www.piesia.com
USB 2.0
+5V_USB
USB_DATA-
USB_DATA+
GND
此内容仅供参考，最终解释权归本公司所有
第 21 页 共 42 页