Piesia N-BOX-J1 Manual page 42

Prompt to find a
bootable device
Blue screen or crash
when entering the
system
Slow system entry
System automatically
restarts
Unable to detect USB
device
凝聚物联智慧 引领智能地球
深圳市派勤电子技术有限公司
1. Please confirm whether the hard disk power cable and data cable are connected properly.
2. Please confirm whether the hard disk has physical damage.
3. Please confirm whether the operating system is installed properly on the hard disk
1. Please confirm whether the memory module and external card are loose.
2. Try to remove the newly installed hardware, uninstall the driver or software
3. Try to replace the memory
1. Try to use third-party software to check if the hard disk has bad sectors.
2. Please confirm if there is too little free space in the partition where the system is located.
3. Please confirm whether the CPU cooling fan rotates normally.
1. Please confirm whether the CPU cooling fan rotates normally.
2. Please confirm whether the IPC reset button is triggered by mistake.
3. Please use anti-virus software to confirm whether the system is infected with virus.
4. Please confirm whether the memory module and external card are loose.
5. Please confirm whether the power supply capacity is enough, try to replace the power supply
1. Please confirm whether the USB device needs to be powered separately.
2. Please confirm whether the USB interface is in poor contact.
3. Please confirm whether the USB controller is turned on in the BIOS Setup
www.piesia.com
此内容仅供参考，最终解释权归本公司所有
第 42 页 共 42 页